- Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with installed scoring saw blade
- Saw unit with permanently precise double swivel segment guide, 6 years Holzkraft warranty on wear of the swivel segments
- Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside
- High-precision sliding carriage made of anodized aluminium on hardened and flanged steel guide rails
- Smooth-running and high-precision sliding carriage made of anodised aluminium with proven and permanently smooth-running ball contact system on hardened and flanged steel guide rails, 10-year warranty on wear of the guide rails.
- Large edging frame (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm
- Saw unit swivels from 90° to -45
- Milling spindle can be swivelled from 90° to -45° to the rear into the milling fence
- Four milling speeds
- Right-left rotation of the milling spindle
- Quick change to thickness planer thanks to parallel opening planing tables
- 2-stage feed in the thicknessing table
- Helical toothed steel infeed roller for even wood infeed
- Three independent industrial motors
- With separate saw-parallel fence and separate jointing fence
- Main switch lockable
- Motor equipped with circuit breaker
Circular saw unit |
---|
Trimming length | 3200 mm |
Cutting width with rip fence | 1000 mm |
Max. cross-cutting width left of saw blade | 3300 mm |
Saw blade angle | 90 – 45 ° |
Max. cutting height at 90° | 104 mm |
Max. cutting height at 45° | 68 mm |
Max. saw blade protrusion 90° | 118 mm |
Max. saw blade protrusion 45° | 84 mm |
Diameter of (main) saw blade | 350 mm |
Explanation about diameter of (main) saw blade | with scorer |
(Main) saw blade speed | 4200 min¯¹ |
Dimensions and weights |
---|
Weight approx. | 1365 kg |
Electrical Data |
---|
Drive motor output | 3 x 5.0 kW |
Scoring motor power | 0.55 kW |
Supply voltage | 400 V |
Mains frequency | 50 Hz |
Extraction port |
---|
Extraction port diameter | 3 x 120 mm |
Saw blade protection extraction port diameter | 60 mm |
Installation information |
---|
Space requirement length | 7180 mm |
Space requirement width/depth | 5050 mm |
Space requirement explanation | The dimensions take into account maximum travel distances or useful lengths. |
Machine body length | 1948 mm |
Machine body width/length | 1440 mm |
Work area length | 1600 mm |
Work area width/depth | 2300 mm |
Explanation about work area | Please add the given dimensions with the required space to obtain the free space recommended for the machine. |
Jointing |
---|
Infeed table width | 410 mm |
Infeed table length | 2200 mm |
Max. cutting depth | 5 mm |
Milling cutter diameter max. |
---|
lowerable | 240 mm |
Pin milling | 320 mm |
Milling spindle |
---|
Angle | 0 – -45 ° |
Mandrel diameter | 30 mm |
Usable length | 125 mm |
Speed(s) | 3500/6000/8000 10000 min¯¹ |
Planing knife shaft |
---|
Type | TERSA |
Diameter | 95 mm |
Number of planing blades | 4 St |
Speed | 5000 min¯¹ |
Sliding carriage and table |
---|
Sliding table length | 3260 mm |
Sliding table width | 360 mm |
Sliding table height | 142 mm |
Table length | 1250 mm |
Table width | 430 mm |
Table height | 900 mm |
Thickness |
---|
Table length | 775 mm |
Table width | 410 mm |
Working height min. | 3 mm |
Working height max. | 240 mm |
Max. cutting depth | 5 mm |
Unit: pc(s).
Packaging unit: 1
- Separate saw-rip fence
- Separate dressing joining stop
- Bogenfrässchutzhaube
- 4-knife Tersa cutterblock
- Anodised aluminum sliding carriage
- Degree grid division at the stop
- Inclined milling unit
- Aluminum stop jaws
- folding stops
- Roll of material on the boom
- Milling stop with quick positioning
- edging shoe
- Eccentric
- Handle for sliding carriage
Scoring unit | with separate scoring motor |
Sliding carriage | made of anodised aluminium |
Handle for sliding carriage | ✔ |
Material roll on the trimming frame | ✔ |
Trimming shoe | ✔ |
Eccentric clamp | ✔ |
Mitre fence | with degree graduation and two professional folding stops |
Saw parallel stop | ✔ |
Dressing join fence | ✔ |
Curved milling protection hood | ✔ |
Milling stop | with aluminium jaws and quick positioning |
Height adjustment and tilting of the saw unit | manual |
Height adjustment and swivelling of the milling unit | manual |
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de