| Dimensions and weights | |
|---|---|
| Length approx. | 1370 mm |
| Width/depth approx. | 640 mm |
| Height approx. | 535 mm |
| Weight approx. | 196 kg |
Center lathe
TU
with feed gear for the demanding user
From 2.545,00
EUR excl. Tax / pc(s).
From 3.028,55
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Are you interested in this product?
Put a request
Find Trader
Variations
| Electrical Data | General | Price | ||||
|---|---|---|---|---|---|---|
| Title | Art.-No. | Supply voltage (V) | VPE | EUR excl. Tax | EUR incl. 19% Tax | |
| OPTIturn TU 2807 (230 V) | 3427001 | 230 | 1 | 2.545,00 | 3.028,55 | |
| OPTIturn TU 2807 (400 V) | 3427003 | 400 | 1 | 2.545,00 | 3.028,55 | |
Select Attributes
Electrical Data
- Supply voltage
General
- VPE
Price
- excl. Tax
- incl. 19% Tax
Promotional price
- excl. Tax
- incl. 19% Tax
Productdetails
- Precise processing
- Powerful, maintenance-free engine
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Smooth-running feed gear with rounded gears running in an oil bath
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Concentricity on the lathe chuck better than 0.04 mm
- Automatic longitudinal / lead screw drive
- Lead screw for thread cutting or automatic longitudinal turning
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Hardened main spindle mounted in adjustable precision tapered roller bearings
- Tapered roller bearings in P5 quality
- Hardened spindle nose with Ø 26 mm spindle bore
- Rolled trapezoid spindles
- Chip protection on the upper slide
- Upper slide on cross slide slidable
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Leadscrew stored in two sintered bearings
- Change gear set in standard scope of supply for thread cutting
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- thrust bearing
- 3-jaw lathe chuck in the standard scope of delivery
- Emergency stop impact switch
- Fully equipped, allowing the user to be productive immediately after commissioning
TU 2807V
- Quiet, powerful and brushless DC drive with excellent control characteristics
- High precision steel lining for higher speeds
- Speed change easily adjustable via potentiometer
- Digital speed display
| Electrical Data | |
|---|---|
| Drive motor output | 0,85 kW |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,07 – 0,4 mm/rev |
| Number of longitudinal feeds | 6 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 3,5 mm/rev |
| Number of metric pitches | 18 |
| Imperial pitch | 56 – 8 Gg/1" |
| Number of imperial pitches | 21 |
| Speed range | |
|---|---|
| Number of gears | 6 |
| Speed range | 150 – 2000 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | short taper |
| Spindle bore/rod passage diameter | 26 mm |
| Tool holder max. chuck height | 12 mm |
| Spindle cone | MT 4 |
| Tailstock | |
|---|---|
| Chuck | MK 2 |
| Quill stroke | 85 mm |
| Quill diameter | 30 mm |
| Travel | |
|---|---|
| Travel upper slide | 60 mm |
| Travel cross slide | 160 mm |
| Travel carriage saddle | 580 mm |
| Work areas | |
|---|---|
| Max. height | 140 mm |
| Max. width | 700 mm |
| Swing diameter above machine bed | 266 mm |
| Swing diameter above planing slide | 170 mm |
| Bed width | 180 mm |
Unit: pc(s).
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.