| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Precision guide and drawbar turning machine
OPTIturn TX 6222 - DPA 32
meets the highest requirements in technical equipment and precision. With digital position indicator DPA 32-3
32.390,00
EUR excl. Tax / pc(s).
38.544,10 EUR incl. 19% Tax / pc(s).
38.544,10 EUR incl. 19% Tax / pc(s).
Promotional price *
30.999,00 EUR excl. Tax / pc(s).36.888,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 31.08.2025 in Germany.
Art.-No. 3432462
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
- All gear wheels of the feed gear made of hardened steel
- Shafts on needle bearings, all components are lubricated in an oil bath
- Hardened and ground face spindle ensures enormous accuracy and durability
- High chip removal during roughing is no problem thanks to the high cutting capacity
- Service-friendly removable rear panel
- Energy chain for gentle cable and hose guidance
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
- Decoupled handwheels tested in accordance with EN 23125
- Two-channel right/left switch tested in accordance with EN 23125
- No change wheels necessary
- Switch with life cycle calculation tested in accordance with EN ISO 13849
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Bed guides hardened and precision ground
- Electronically braked motor
- Electronic feed cut-off of the Z-axis
- All electronic controls can be reached centrally
- Complete illumination of the work area
- External coolant tank with level indicator and oil separator
- Complete lead and feed spindle cover
- Electric position stop with quadruple position stop
- Three-jaw lathe chuck included as standard
- Quick-change steel holder SWH 7-C
- 1 steel holder 32 x 130 type D for square chisel 25 mm
- Digital position indicator DPA 32-3
TX 5216
- Large spindle bore Ø 80 mm
TX 6222:
- Large spindle bore Ø 105 mm
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 100 W |
| Dimensions and weights | |
|---|---|
| Length approx. | 3550 mm |
| Width/depth approx. | 1200 mm |
| Height approx. | 1830 mm |
| Weight approx. | 2800 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 7,5 kW |
| Total rated value | 8.5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Pitches | |
|---|---|
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Speed range | |
|---|---|
| Number of gears | 12 |
| Speed range | 40 – 1650 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 105 mm |
| Spindle cone | Ø 113 (cone 1:20) mm |
| Tailstock | |
|---|---|
| Chuck | MT5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel | |
|---|---|
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 2000 mm |
| Work areas | |
|---|---|
| Max. height | 310 mm |
| Max. width | 2200 mm |
| Swing diameter above machine bed | 620 mm |
| Swing diameter above planing slide | 424 mm |
| Turning length in bed bridge | 880 mm |
| Bed width | 350 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Operating tool
- Initial machine filling with quality oil
- Three-jaw lathe chuck Ø 315 mm Camlock no. 8
- Two non-rotating centers MK5 (short/long)
- Quick-change toolholder SWH 7-C
- Steel holder for square chisel 32 x 130 type D
- Adapter Ø 113 mm-MK5
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
