| Working width | 1350 mm |
| Cutting performance material tensile strength 400 N/mm² | 3 mm |
| Cutting performance material tensile strength 450 N/mm² | 3 mm |
| Cutting performance material tensile strength 700 N/mm² | 1.5 mm |
| Number of sheet support arms | 2 St |
| Rear stop adjustment range up to | 750 mm |
| Rear stop speed | 28 mm/s |
| Side stop length | 1000 mm |
| Motor output rear stop | 0.37 kW |
| Cutting angle | 2,2 ° |
| Max. strokes for full cutting length | 40 /min |
| Cutting kerf adjustment min. | 0.05 mm |
| Cutting kerf adjustment max. | 0.4 mm |
| VPE | 1 |
Motorized sheet metal shears
MTBS 1350-30 T
With NC-controlled backgauge, front and rear ejection and manual gap adjustment
27.390,00
EUR excl. Tax / pc(s).
32.594,10 EUR incl. 19% Tax / pc(s).
32.594,10 EUR incl. 19% Tax / pc(s).
Promotional price *
23.999,00 EUR excl. Tax / pc(s).28.558,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2025 in Germany.
Art.-No. 3815613
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Pneumatic sheet support, sheet ejection to the front or rear controllable via toggle switch
- Backgauge 750 mm guided on round shafts and driven via ball screw
- Stainless steel table supports with transfer balls for comfortable material handling
- Positioning control of the backgauge Maper HT071 with digital dimension display
- Heavy and robust steel construction in welded design
- Constant, low cutting angle for optimum cutting results
- Side fence 1000 mm with scale and T-slot
- Two material support arms 500 mm with T-slot
- Balls in the support table for easier material transport
- Cutting gap adjustment by means of vernier rings
- High quality blade suitable for stainless steel
- LED illumination of the cutting area
- Continuous finger protection device
- Mobile foot pedal with emergency stop switch
- All moving parts with low-maintenance bearings
- Electrical system from Siemens and Schneider
- Thin sheets are supported in order to be able to apply dimensionally to the backgauge
- pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
- Operator can choose if the section falls into the back room or the operator side
| Dimensions and weights | |
|---|---|
| Table length | 1507 mm |
| Table depth | 420 mm |
| Table height | 800 mm |
| Machine body depth | 680 mm |
| Length approx. | 2070 mm |
| Width/depth approx. | 2120 mm |
| Height approx. | 1110 mm |
| Weight approx. | 1190 kg |
| Electrical Data | |
|---|---|
| Absorbed power drive motor | 3.5 kW |
| Total rated value | 4 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
| Table support made of stainless steel | with transfer balls |
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
Optional parts
Optional parts can not be retrofitted and are available only when ordering new machines.