| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Guide and traction spindle lathes
OPTIturn TM 3310V
convinces by stable construction and easy handling. With digital position indicator DPA 32
Price upon request
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3403027
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Hardened and ground Z-axis guideway
- Precisely machined carriage
- DC 24 volt electrics
- Motor protection switch
- Main motor electrically braked
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Smooth-running feed gear with rounded gears running in an oil bath
- Hardened main spindle mounted in adjustable, precise tapered roller bearings
- Right/left rotation switchable on the bed slide
- Two-channel safety electronics
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengagement function according to EN23125 in the X and Z axis
- Switch rod on the bed slide for selecting longitudinal or face feed
- Switch with life cycle calculation tested in accordance with EN ISO 13849
- Machine base in sturdy steel construction
- Quadruple steel holder
- Emergency stop switch right and left
- Cutting constant VSC
| Dimensions and weights | |
|---|---|
| Length approx. | 1760 mm |
| Width/depth approx. | 745 mm |
| Height approx. | 1590 mm |
| Weight approx. | 470 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 1.5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0.02 – 0.4 mm/rev |
| Number of longitudinal feeds | 24 |
| Flat feed range | 0.01 – 0.2 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0.4 – 10 mm/rev |
| Number of metric pitches | 29 |
| Imperial pitch | 56 – 4 Gg/1" |
| Speed range | |
|---|---|
| Number of gears | 6 Steps |
| Speed range | 14 – 2800 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 4 |
| Spindle bore/rod passage diameter | 38 mm |
| Tool holder max. chuck height | 16 mm |
| Spindle cone | MT 5 |
| Tailstock | |
|---|---|
| Chuck | MT 3 |
| Quill stroke | 100 mm |
| Quill diameter | 38 mm |
| Travel | |
|---|---|
| Travel upper slide | 90 mm |
| Travel cross slide | 168 mm |
| Travel carriage saddle | 850 mm |
| Work areas | |
|---|---|
| Max. height | 165 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 330 mm |
| Swing diameter above planing slide | 216 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three-jaw lathe chuck Ø 160 mm, no. 4
- Reducing sleeve MK 5 / MK 3
- Non-rotating center point MK 3
- Quadruple steel holder 16 mm
- Interchangeable gear set
- Machine base
- Initial machine filling with quality oil
- Operating tool
| Digital position indicator | DPA 32 |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
