OPTIturn S 600MY

• Heavy-duty design
• Compact design
• Renishaw measuring arm for manual tool measurement
• Directly mounted main spindle encoder for higher accuracy
• Ball screw with improved accuracy, rigidity and heat resistance.
• Siemens servo motors in all axes
• All servo motors with integrated encoder for maximum accuracy
• The motor is located on the side of the machine, preventing heat transfer and vibrations caused by the motor.
• Inclined bed design 30° for particularly large machining diameters.
• Better unobstructed chip flow into the chip tray
• Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws
• Hardened and precision-ground ball screws for high rapid traverse speeds in all axes
• Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity
• Device for manual tool measurement
• Servo tailstock for optimized machining
• Heat exchanger
• Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs
• Belt-type chip conveyor ensures efficient chip removal
• Work light for complete illumination of the work area
• Coolant device with cleaning gun
• RJ45 , power interface
• EMC (electromagnetic compatibility)

SINUMERIK 828D
High-tech for the compact class

The use of two independent tools makes 4-axis turning - balance cutting - possible. The new functions include multi-channel capability with ShopTurn, which allows, among other things, the synchronization of programs with programSYNC. The new software offers the option of running two channels simultaneously in turning and grinding machines.
SINUMERIK CNC controlSinumerik 828D Basic sets standards in all aspects of machining performance. Whether accuracy and speed, reduction of cycle times or energy efficiency and safety - SINUMERIK sets the pace.

Communicative

• Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card

16 function keys

• The 8 horizontal and 8 vertical softkeys allow you to access all operating screens with just a few keystrokes

User-friendly

• Full QWERTY keyboard
• Hard keys with protective film
• IP65 protection class

SAFETY Integrated - set up with the door open

• Functional safety also protects against high costs!
  Machine and system safety is not only important because strict regulations must be observed. When everything runs safely, you benefit from time savings in engineering, higher system availability and greater investment security.

PPU 270 control unit

• 10.4" color display
• 4:3 format
• User-friendly SINUMERIK Operate software

System software

• PPU 271 SW 24
• 3 MB CNC memory
• 3 ms block change time
• 50 Look Ahead
• 128 tools

Complete package

• Safety Integrated
• Residual material detection and machining
• ShopMill work step programming
• Manage network drive
• 3-D simulation
• Co-drawing

Additional package SIEMENS OSS Plus

• 12 months; article no. 3589020
• 24 months; article no. 3589021
• 36 months; article no. 3589022

Information on this additional package and conditions for claiming under: Material Defects Liability and On-Site Service - SiePortal - Siemens WW

• Axial tool holder driven tools
• 2 radial tool holders for driven tools
• 3 drilling tool holders
• 5 OD tool holders
• Face tool holder
• Boring bar Ø 20 mm
• Boring bar Ø 25 mm
• Boring bar Ø 32 mm