AIRPROFI BK 703/13/10

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run.
• The large fan ensures optimal cooling.
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation.
• Quality electric motors equipped with motor protection switch
• Ready for connection with all fittings such as pressure switch for fully automatic on-off operation, safety and check valve, condensate and air release valve for autonomous operation
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• With high-quality CONDOR pressure switch
• Ready for connection with all fittings

Room amenities

• High-performance gray cast iron unit with low speed
• Aftercooler with large cooling fins ensures low tank inlet temperature
• The flexible armored hose line with heat protection prevents a vibration break.

Side compressors are used

• if the existing air volume is too small.
• when peak loads have to be covered.
• if 100% safety must be warrantyd.
• if old equipment would require expensive repairs.

Recommended accessories

• AIRCRAFT tank batteries as 2 or 4 batteries for up to 400 liters additional air reserve

• Two-stage compressing two-cylinder high-performance unit
• Automatic CONDOR pressure switch
• Inside and outside hot-dip galvanized compressed air tank
• 1 manometer for tank pressure
• 1x 3/4 inch ball valve for compressed air extraction
• 1x 3/8 inch ball valve at the lower tank outlet for drainage
• Mains cable with 400 V plug
• Power plug with phase inverter for manual reversal of the direction of rotation
• Flexible armoured hose with heat protection
• Safety valve
• Oscillating elements
• Ready for connection with all fittings