AIRPROFI BK 120-13F-7.5 BK AP

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run.
• Large fan wheel for optimal cooling
• Intermediate and aftercooler for a low tank inlet temperature and reduction of condensation
• Quality electric motors equipped with motor protection switch
• Ready for connection with all fittings such as safety valve and check valve, condensate and air outlet valve for autonomous operation

Compressor compressors are used when:

• the existing amount of air is too small
• Excellence must be covered
• 100% safety must be warrantyd
• Old appliances would require expensive repairs

Room amenities

• High-performance gray cast iron unit with low speed
• With high-quality CONDOR pressure switch for fully automatic on-off operation
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• Flexible armored hose line with heat protection prevents vibration breakage

We save for you - 13 bar instead of 15 bar!

• Our 15 bar compressors are factory set at 13 bar shutdown pressure. The reason for this is that, according to experience, 90% of all users have an operating pressure of max. 13 bar.
• Any additional pressure generated means an additional energy consumption of approx. 8% per bar.
• If you still need the maximum pressure of 15 bar, you can easily adjust it yourself at the pressure switch at any time.

• Two-stage compressing two-cylinder high-performance unit
• Automatic CONDOR pressure switch
• Inside and outside hot-dip galvanized air reservoir
• 1 manometer for tank pressure
• 1x 3/4 inch ball valve for compressed air extraction
• 1x 3/8 inch ball valve at the lower tank outlet for drainage
• Flexible armoured hose line with heat protection
• Safety valve
• Oscillating elements
• Ready for connection with all fittings