AIRPROFI 753/13/15

• The two-stage, high performance, 2-cylinder unit provides very low RPM for smooth, low-vibration operation
• Large fan for optimal cooling
• Between- and aftercooler for a low tank inlet temperature and reduction of condensation
• High quality electric motors equipped with motor protection switch
• Ready for connection with all fittings such as safety valve and check valve, condensate and air release valve for autonomous operation
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• High quality CONDOR pressure switch for fully automatic on-off operation
• Flexible armored hose line with heat protection prevents vibration break

Compressor compressors are used when:

• the available air volume is too small
• Peak performance needs to be met
• 10 0% safety must be warrantyd
• Old equipment would require expensive repairs

We save for you - 13 bar instead of 15 bar!

• Our 15 bar compressors are factory set to 13 bar shutdown pressure. The reason for this is that, according to experience, 90% of all users have an operating pressure of max. 13 bar
• Any additional pressure generated means an energy consumption of about 8% per bar.
• If you still need the maximum pressure of 15 bar, you can easily do it yourself at any time at the pressure switch.

• Two-stage compressing two-cylinder high-performance unit
• Automatic CONDOR pressure switch
• Inside and outside hot-dip galvanized air reservoir
• 1 manometer for tank pressure
• 1x 3/4 inch ball valve for compressed air extraction
• 1x 3/8 inch ball valve at the lower tank outlet for drainage
• Flexible armoured hose line with heat protection
• Safety valve
• Oscillating elements
• Ready for connection with all fittings