- Two-stage high-performance 2-cylinder engine with gray cast iron cylinder block
- Low speed for quiet, low-vibration operation and long life
- Large fan for optimum performance Cooling
- High-quality electric motors equipped with motor protection switch
- With phase inverter for easy manual reversal of the direction of rotation
- Intermediate and aftercooler reduce condensation
- Maintenance block with two pressure gauges for tank pressure and working pressure and high-quality CONDOR pressure switch
- Fully automatic on-off operation
- Ready for connection with all fittings
- Fifteen-year rust-proofing on inside and out external hot-dip galvanized compressed air tank
Compressed air tank |
---|
Maximum pressure | 13 bar |
Pressure vessel capacity | 150 l |
Explanation Pressure vessel capacity | 2 x 75 l |
Tank surface | Galvanised |
Compressor |
---|
Compressor system | HOS |
Suction capacity approx. | 575 l/min |
Filling capacity approx. | 460 l/min |
Explanation filling capacity | at 6 bar working pressure |
Number of cylinders | 2 |
Number of compressor stages | 2 |
Dimensions and weights |
---|
Length approx. | 1200 mm |
Width/depth approx. | 900 mm |
Height approx. | 1140 mm |
Weight approx. | 230 kg |
Electrical Data |
---|
Delivery power | 4 kW |
Supply voltage | 400 V |
Mains frequency | 50 Hz |
Noise emission |
---|
Whisper quiet | No |
Sound pressure level Lp | 79 dB(A) |
Explanation sound pressure level Lp | Sound pressure level at 1 m distance according to DIN 45635 T 13 |
Unit: pc(s).
Packaging unit: 1
- Two-stage compression two-cylinder high-performance unit
- Automatic CONDOR pressure switch
- 2 x inside and outside hot-dip galvanized compressed air tank
- ZÜS type tested
- 1 pressure gauge for tank pressure
- 1x 3/4 inch air outlet on the boiler
- 1x 1/2 inch air outlet on the refrigerant dryer
- Power cable with 400 V plug
- Power plug with phase inverter for manual reversal of the direction of rotation
- Flexible reinforced hoses with heat protection
- safety valve
- Shock mounts
- Ready for connection with all fittings
- On safety stand
Pressure regulation | Pressure regulator |
Automatic pressure switch | CONDOR |
Drive transmission | V-belt |
Material compressed air line | Flexible armored conduit with heat protection |
Connector | 400V CEE plug with phase inverter |
Compressed air outlet | Ball valve |
Condensate drain | 3/8" ball valve on each tank |
Pressure vessel | Hot-dip galvanized inside and out with fifteen-year warranty against rust |
ZÜS tested | Testing before commissioning can also be carried out by a qualified person |
Compressor base | Swing elements, safety stand pallet |
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6
4921 Hohenzell
Österreich / Austria
info@aircraft.at