| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Drilling-milling machine
OPTImill BF 16Vario
Small drilling-milling machine with electronically infinitely variable drive for the modeler
1.099,00
EUR excl. Tax / pc(s).
1.307,81 EUR incl. 19% Tax / pc(s).
1.307,81 EUR incl. 19% Tax / pc(s).
Promotional price *
1.029,00 EUR excl. Tax / pc(s).1.224,51 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2025 in Germany.
Art.-No. 3338116
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Versatile application possibilities
- Two-stage gear ratio
- Tool holder MK 2
- Safety electronics in 24 Volt version
- EMC filter class C1
- Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
- Height-adjustable and large-dimensioned protective screen with microswitch
- Accurate delivery through positionable scale rings on all handwheels
- Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
- Infinitely variable speed from 100 to 3,000 min-1
- High concentricity measured by tapered roller bearing better than 0.015 mm in quill
- Stable column with dovetail guide via wedge bars adjustable on all 3 axes
- Game in the feed spindle adjustable and adjustable
- Column laterally displaceable for extended application
- Massive cross table with T-slots and coolant channel as well as adjustable end stops
- Integrated longitudinal scale in the cross table
- All travel paths can be read on scales
- Clean milling pattern by individually clamped guides
- Inexpensive and stable in value
| Dimensions and weights | |
|---|---|
| Length approx. | 505 mm |
| Width/depth approx. | 465 mm |
| Height approx. | 795 mm |
| Weight approx. | 62 kg |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 52 mm |
| Max. size shaft milling cutter | 20 mm |
| Drilling performance steel (S235JR) | 16 mm |
| Continuous drilling performance steel (S235JR) | 12 mm |
| Electrical Data | |
|---|---|
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 400 mm |
| Table width | 120 mm |
| Min. clearance vertical spindle - milling table | 0 mm |
| Max. clearance vertical spindle - milling table | 275 mm |
| T-groove size | 10 mm |
| T-groove number | 3 |
| T-groove spacing | 35 mm |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C1 |
| Travel | |
|---|---|
| X axis manual | 220 mm |
| Y axis manual | 160 mm |
| Z axis manual | 210 mm |
| Vertical spindle | |
|---|---|
| Reach | 170 mm |
| Spindle chuck | MT 2 / M10 |
| Speed range | 100 – 3000 min¯¹ |
| Number of gears | 2 |
| Speed control | electronically adjustable |
| Tightening bar | M 10 |
| Vertical spindle normal operation | 0,5 kW |
| Swivel range milling cutter head Z - X plane | ± 90 ° |
| Quill stroke | 50 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Conical mandrel MK 2 / B16
- Pulling rod M 10
- operating tool
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
