| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
TIG inverter
CRAFT-TIG PRO 201 AC/DC P Pulse
Welding equipment for the highest demands, always the right wave for your task
Price upon request
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 1364212
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Built in modern inverter technology
- Universally applicable for welding all common types of electrodes
- Ideally suited for assembly work due to protection class IP 21S generally also for outdoor work
- Suitable for use on the generator, for example in workshops, schools, metal construction, on building sites or for farmers
- Quiet running fan with good heat dissipation for high switch-on times
- Power factor correction PFC for trouble-free use also on cable drum
- Precise setting and display of welding parameters via large LC display
- TIG pulsing with 999 Hz enables welding with reduced heat input
- HF high frequency ignition ignites during TIG welding without touching the workpiece
- Equipped with tacking function 0.2 seconds
- Interval welding function with adjustable welding and pause time
- Multivoltage from 110 to 230 volts
- Nine programs can be stored
- Adjustable waveforms, balance and frequency in AC mode
- Nine programs storable
- Tungsten electrode diameter adjustable
| Device data | |
|---|---|
| Pulse rate | 0.5 - 999 Hz |
| Ignition | high frequency |
| Torch cooling | gas |
| Dimensions and weights | |
|---|---|
| Length approx. | 545.5 mm |
| Width/depth approx. | 190 mm |
| Height approx. | 360 mm |
| Weight approx. | 15.4 kg |
| Duty cycle | |
|---|---|
| at Imax. 40°C TIG DC | 60 % |
| at Imax. 40°C electrode | 35 % |
| Current at 100% DC 40°C TIG DC | 110 A |
| Current at 100% DC 40°C electrode | 110 A |
| Electrical connections | |
|---|---|
| Power consumption in idle mode | < 50 W |
| Electrical Data | |
|---|---|
| Total output | 7.1/4.9 kVA |
| Current consumption TIG AC | 20.9 A |
| Input current TIG DC | 21.4 A |
| Input current electrode AC | 28.7 A |
| Current consumption electrode DC | 30.9 A |
| Supply voltage | 110/230 V |
| Mains frequency | 50/60 Hz |
| Power consumption | |
|---|---|
| TIG DC | 4.8 kVA |
| Electrode | 7 kVA |
| Efficiency | 83.37 % |
| Setting range | |
|---|---|
| TIG DC | 10 – 200 A |
| Electrode | 10 – 200 A |
| Standards and certifications | |
|---|---|
| Standard | EN 60974-1:2012, EN 60974-10:2014 |
| EMC class | A |
| Explanation EMC class | This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Earth cable 25 mm² 4 m with 300 A terminal
- TIG torch SR26, 4 m up/down function
- Gas hose 4 m
- Large pressure reducer
| Power factor correction | ✔ |
| Process MMA | ✔ |
| Process TIG pulsing | ✔ |
| LC display | 4 " |
| Single Spot | ✔ |
| Multi Spot | ✔ |
| Water cooling connection | ✔ |
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
