| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Stationary piston compressor
AIRPROFI BK 119-270V-5,5
With a standing 270 L container maximum performance in the tightest of spaces.
2.765,00
EUR excl. Tax / pc(s).
3.290,35 EUR incl. 19% Tax / pc(s).
3.290,35 EUR incl. 19% Tax / pc(s).
Promotional price *
2.249,00 EUR excl. Tax / pc(s).2.676,31 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 31.08.2025 in Germany.
Art.-No. 2774712
Are you interested in this product?
Put a request
Find Trader
Productdetails
- The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run.
- Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation.
- Large fan ensures optimal cooling.
- Fully automatic on-off operation
- Quality electric motors equipped with motor protection switch
- Flexible armored hose line with heat protection prevents vibration breakage.
- Three compressed air extraction points on the container
- Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
- With high-quality CONDOR pressure switch
- Ready for connection with all fittings
- From 7.5 kW as standard with automatic star-delta switch
Room amenities
- Condensate conditioner for oil-water separation
- Important notes on condensate treatment can also be found in the section on compressed air preparation.
- Fine filter for separating condensate and solid impurities with particles up to 1 μm.
- Compressed air quality according to ISO 8573-1
- As a pre-filter in front of the refrigeration dryer
- The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run.
- Large fan ensures optimal cooling
- The low speed ensures high effective air flow, reduces wear.
- Intermediate and aftercoolers with large cooling fins ensure low tank inlet temperature and thus reduce condensation.
- Flexible armored hose line with heat protection for a long service life, as no vibration breakage is possible
equipment
- Automatic steam trap on the compressed air tank
- By level control no unnecessary pressure loss
| Compressed air tank | |
|---|---|
| Maximum pressure | 10 bar |
| Pressure vessel capacity | 270 l |
| Tank surface | Galvanised |
| Compressor | |
|---|---|
| Compressor system | HOS |
| Suction capacity approx. | 650 l/min |
| Filling capacity approx. | 520 l/min |
| Explanation filling capacity | at 6 bar working pressure |
| Number of cylinders | 2 |
| Number of compressor stages | 2 |
| Dimensions and weights | |
|---|---|
| Length approx. | 780 mm |
| Width/depth approx. | 680 mm |
| Height approx. | 1870 mm |
| Weight approx. | 152 kg |
| Electrical Data | |
|---|---|
| Delivery power | 4 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Noise emission | |
|---|---|
| Sound pressure level Lp | 83 dB(A) |
| Explanation sound pressure level Lp | Sound pressure level at a distance of 1 m according to DIN 45635 T 13 |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Two-stage compression two-cylinder high-performance unit
- Toothed drive belts
- Automatic CONDOR pressure switch
- Power plug with phase inverter for manual reversal of the direction of rotation
- 1 pressure gauge for tank pressure
- 1 ball valve on the container
- Flexible armored hose line with heat protection
- Internally and externally hot-dip galvanized compressed air tank
- Three compressed air extraction points on the container
- safety valve
- Condensate drain valve
- Shock mounts
- Ready for connection with all fittings
| Automatic pressure switch | CONDOR |
| Drive transmission | V-belt |
| Material compressed air line | Flexible armored conduit with heat protection |
| Connector | 400V CEE plug with phase inverter |
| Compressed air outlet | Ball valve |
| Condensate drain | 3/8" ball valve |
| Pressure vessel | Hot-dip galvanized inside and out with a fifteen-year guarantee against rust |
| Compressor base | Oscillating elements |
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
